Firewall
Load Balancing using a ASA 5510 and two separate ISPs
Can an ASA 5510 load balance over two ISPs (i.e. send and receive traffic over two different connections simultaneously)?
I know the unit has Dual-ISP support so if one ISP fails it can re-route the traffic through the other ISP but can it utilise both circuits and take advantage of both connections simultaneously?
Default ports used in SecureMeeting?
My company is firewalled off from the parent company, and connected over a site-to-site VPN. In order for thier users to access our SSL VPN for SecureMeeting, we need to know what ports are used for SecureMeeting and all of its features (Desktop sharing, etc.). They run a webwasher proxy on their end and it [...]
Firewalling: Load Balancing PIX
We have the following scenario. 2 Firewall Active/Standby are facing 2 routers configured with HSRP.
Is it possible in order to achieve LOAD Balancing for certain destination traffic to have 2 static routes having same AD but different next hop ? (each route pointing to different physical IP address of the router and not to the [...]
SRX firewall nat or route interface
In SRX series, do we have some thing like ScreenOS as below?
set interface ethernet0/0 route
set interface ethernet0/1 nat
Or in SRX each every interface mode i cant change it?
Data Link in NSRP config Acitve/Active
I try to configure NSRP A/A using NS204 with screenOS 5.4.0r4.0.
the 02 Firewall are connected with interface Ethernet4 as HA link.
The issue is in NSRP link, I see only Control Link (ethernet4), the Data Link is not avaialble, and it seems that Data link is very important in such NSRP config!
Please, Is there any explanation [...]